[Ensure Pass Dumps Exam] Latest Updated Cisco 210-065 Dumps CCNA Collaboration Exam Video Study Online With Low Price 311Q Full Version Offer 1-22

Latest Updated Pass4itsure 210-065 Dumps Test, Real Cisco 210-065 Dumps Demos Online With Low Price, We Help You Pass Implementing Cisco Video Network Devices v1.0. – pass4itsure 210-065 dumps pdf 311Q Full Version.

Pass4itsure Success:

Success
“I passed my exam earlier this morning. You know what I just use study materials from this site, no other books at all! It is really helpful if you do not get much time to prepare your exam. You should have a try. It won’t let you down. Why do you want to take roundabout ways if there is a shortcut.Trust me or not. Good luck to you all. Bob”

Awesome
“This is my first time to sit a Cisco exam, so you will know how nervous I was! Thanks for your help, Kingexam! I passed. I think 95% questions are more or less the same as your guidance. Some questions with the answer are in the different sequence, and, sorry to point out that one answer of your questions is incorrect, I’ll email you to let you know, you guys need to revise it. Well, I think your kingexam’s guidance is still more accurate than others. The most important thing is I got passed 🙂 Paul Hussler”

[Ensure Pass4itsure 210-065 PDF Dumps Exam From Google Drive]:https://drive.google.com/open?id=0BwxjZr-ZDwwWQk1xeU5TZ3ExalE

[Ensure Pass4itsure 210-260 PDF Dumps Exam From Google Drive]:https://drive.google.com/open?id=0BwxjZr-ZDwwWU0xad3NvRWR4Qzg

Cisco 210-065 Dumps Recommended Traing

The following course is the recommended training for this exam.

  • Implementing Cisco Video Network Devices, Part 1 (CIVND1)
  • Implementing Cisco Video Network Devices, Part 2 (CIVND2) v1.0

Courses listed are offered by Cisco Learning Partners-the only authorized source for Cisco IT training delivered exclusively by Certified Cisco Instructors. Check the List of Learning Partners for a Cisco Learning Partner nearest you.

Latest and Most Accurate Pass4itsure 210-065 Dumps Exam Q&As(1-22)

210-065 dumps
210-065 dumps
210-065 dumps
210-065 dumps
The Cisco Telepresence Codec C90 is unable to call the Cisco IP Video Phone. Assuming that the calling search space has been configured correctly, which of the these can cause this issue?
A. The Cisco Telepresence Codec C90 can only be registered to a Cisco Telepresence Video Communication Server.
B. A multipoint control unit is required in order for the call to work.
C. The Cisco Telepresence Codec C90 can only be registered as a SIP endpoint to Cisco Unified Communications Manager. H.323 is not supported.
D. URI dialing has not been configured on Cisco Unified Communications Manager.
E. The Cisco Telepresence Codec C90 Profile 1 > CallSetupMode must be configured as a gateway since Cisco Unified Communications Manager does not have a gatekeeper functionality.
F. The Cisco Telepresence Codec C90 is not registered as a SIP endpoint on Cisco Unified Communications Manager. The Cisco Telepresence Codec C90 needs to be registered as both SIP and H.323.
210-065 exam Correct Answer: C
Explanation
Explanation/Reference:

QUESTION 2
An engineer is connecting a VISCA cable. What is the purpose of this cable?
A. to connect camera to codec
B. to connect camera to monitor
C. to connect camera to touch panel
D. to connect camera to network
Correct Answer: A
Explanation

QUESTION 3
An engineer encounters video quality issues with an endpoint. To capture ongoing call statistics from the CLI, which command should the engineer use?
A. xStatus Call Feature Display
B. xStatus OutgoingVideoChannel Netstat 1
C. xStatus Diagnostics
D. xCommand Diagnose
210-065 dumps Correct Answer: C
Explanation
Explanation/Reference:

QUESTION 4
An engineer must ensure that a user can create content playlists for Digital Signs and Show and Share. Which Cisco Digital Media Suite component allows playlists to be created?
A. Cisco DMD
B. Cisco DMM
C. Cisco TMS
D. Cisco MXE
Correct Answer: B
Explanation

QUESTION 5
Which two tools can be used to extract traces from a Cisco Unified Communications Manager server? (Choose two.)
A. RTMT
B. TraceRT
C. Wireshark
D. CLI
E. Syslog
210-065 pdf Correct Answer: AD
Explanation

QUESTION 6
A manager requires multiparty video meetings with presentation capability. Which endpoint meets the requirement assuming there is no centralized bridge?
A. Cisco SX20
B. Cisco DX650
C. Cisco 7800
D. Cisco Jabber
Correct Answer: D
Explanation
Explanation/Reference:

QUESTION 7
210-065 dumps
210-065 dumps
210-065 dumps
210-065 dumps
Refer to the Exhibits, in order to create a scheduled or ad-hoc multipoint conference, which two tolls can be used? (Choose two)
A. Exhibit A
B. Exhibit B
C. Exhibit C
D. Exhibit D
E. Exhibit E
210-065 vce Correct Answer: BD
Explanation
Explanation/Reference:

QUESTION 8
An administrator is troubleshooting an endpoint whose SIP Registration Status shows “Failed: 403 Forbidden” and must obtain information about the cause of the failure. To which two menu locations must an engineer navigate? (Choose two.)
A. Endpoint > Log Files > messages.log
B. Endpoint > Diagnostics > Log Files > all.log
C. VCS > Maintenance > Diagnostics > Incident Reporting > View
D. VCS > Status > logs > Configuration Log
E. VCS > Status > logs > Event Log
Correct Answer: DE
Explanation

QUESTION 9
Which type of lighting is recommended for Cisco TelePresence immersive solutions?
A. point
B. reflective
C. direct
D. indirect
210-065 exam Correct Answer: A
Explanation
Explanation/Reference:

QUESTION 10
A Cisco EX60 is connected to the network, but users cannot make calls and the device is unregistered. The voice engineer configured the device on Cisco Unified Communications Manager. Which two options are causes of this problem? (Choose two.)
A. SIP URI is not configured correctly.
B. H.323 parameters are not configured correctly.
C. IP address is in a different subnet.
D. No user is associated to a device.
E. SIP proxy is not configured correctly.
Correct Answer: DE
Explanation

QUESTION 11
Which desktop endpoint support 802.3af PoE?
A. DX70
B. DX80
C. DX90
D. DX650
210-065 dumps Correct Answer: D
Explanation
Explanation/Reference:

QUESTION 12
An engineer is backing up a VCS configuration. Which two methods can be used? (Choose two.)
A. FTP
B. SFTP
C. SSH
D. web administration
E. local
Correct Answer: BC
Explanation
Explanation/Reference:

QUESTION 13
An engineer sees a video camera icon on the Cisco IP phone screen status line. Which meaning of this icon is true?
A. The Cisco VT camera is connected to the PC, and the PC is connected to the Cisco IP phone.
B. The Cisco IP phone has web access.
C. The Cisco IP phone is receiving a video call.
D. The Cisco IP phone is configured with video capabilities.
210-065 pdf Correct Answer: D
Explanation

QUESTION 14
A company just acquired a Cisco MCU 5300 for multi videoconferencing. The networking engineer must create a conference. To which tab does the engineer go to create a conference?
A. Endpoints
B. Conferences
C. Network
D. Settings
Correct Answer: B
Explanation
Explanation/Reference:
In this tutorial the instruction `Go to Conferences > Move participants’ means click the Conferences link on the menu bar and then click the Move participants tab.

QUESTION 15
Which option is the Cisco recommended minimum viewing distance for a 52″ monitor installed in a video conferencing room?
A. 1.5 m
B. 3.0 m
C. 2.5 m
D. 2.0 m
210-065 vce Correct Answer: A
Explanation

QUESTION 16
Which effect of the CLI set audio aec enable command on the immersive Cisco Telepresence system is true?
A. Echo cancellation is enabled.
B. Call economy quality feature is enabled.
C. Noise cancellation is enabled.
D. AEC audio codec is enabled.
Correct Answer: A
Explanation

QUESTION 17
What is the process for resetting a Cisco VCS control appliance back to initial default configuration?
A. Push down and hold the reset button on the back of the VCS appliance for 10 seconds and power cycle the device.
B. Log onto the CLI console as root and initiate the defaults-reset command.
C. Log into the GUI interface as administrator, choose System Settings, select Restore, select Factory Reset.
D. Log onto the CLI console as root and initiate the factory-reset command.
210-065 exam Correct Answer: D
Explanation
Explanation/Reference:

QUESTION 18
Which two Cisco TelePresence endpoints support hosting embedded multisite conferences? (Choose two.)
A. sx20
B. MX800
C. DX70
D. DX80
E. Jabber Video for Cisco TelePresence
Correct Answer: AB
Explanation
Explanation/Reference:
Explanation: For reference, the below endpoints support Multisite:
MX200/300 G2
MX700/800
SX20/80

QUESTION 19
Which option is the Cisco recommended layout if cascading is being used?
A. Enhanced Continuous Presence
B. Full Participant
C. Continuous Presence
D. Active Speaker
210-065 dumps Correct Answer: C
Explanation
Explanation/Reference:

QUESTION 20
When an administrator schedules a conference, which three devices are part of the process? (Choose three.)
A. endpoint
B. Cisco Prime Collaboration Manager
C. Cisco TelePresence Management Suite
D. Cisco Communications Manager
E. MCU appliance
F. Cisco TelePresence Content Server
Correct Answer: BDF
Explanation

QUESTION 21
Refer to the exhibit.
210-065 dumps
You are deploying a Cisco VCS Expressway with the Advanced Networking option key into two separate DMZs.
Gateways for all networks are the lowest usable IP address in the subnet. While you are logged in as an admin user,
which command should you enter into the CLI, to enable IP routing to the Cisco VCS Control and nothing else on the
internal network?
A. xConfiguration IP Gateway: 172.18.105.1
B. xConfiguration RouteAdd Address:192.168.10.25 PrefixLength:16 Gateway:172.18.105.1 Interface: LAN1
C. xCommand RouteAdd Address:192.168.0.0 PrefixLength:16 Gateway: 172.18.105.1 Interface: LAN1
D. xCommand RouteAdd Address:192.168.10.25 PrefixLength:32 Gateway: 172.18.105.1 Interface: LAN1
210-065 pdf Correct Answer: D

QUESTION 22
Refer to the exhibit.
210-065 dumps
Users in a Cisco TelePresence room report audio and video quality issues. You have been asked to troubleshoot the issue. You log in to the endpoint GUI and check telephony settings. Which option would you recommend to resolve the issue?
A. Audio/video quality issues are generally due to low bandwidth. Contact your carrier to increase the bandwidth.
B. andquot;DSCP For TelePresenceandquot; is not correct. Configure the correct value via codec GUI.
C. andquot;DSCP For Audioandquot; is not correct. Configure the correct value via codec GUI.
D. DSCP values are correct. Check the QoS configuration on the router.
E. The andquot;DSCP For TelePresenceandquot; and andquot;DSCP For Audioandquot; values are not correct.
Configure the correct value in codec GUI.
F. The andquot;DSCP For TelePresenceandquot; and andquot;DSCP For Audioandquot; values are not correct.
Configure the correct value in the Cisco Unified Communications Manager service parameter.
Correct Answer: F

The Implementing Cisco Video Network Devices v1.0 (CIVND) exam (210-065) is a 75-minute assessment with 55-65 questions. This exam tests a candidate’s ability to develop network applications in the Cisco environment. With the complete collection of questions and answers, Pass4itsure has assembled to take you through 311 Q&As to your 210-065 dumps exam preparation.

Exam Code: 210-065
Exam Name: Implementing Cisco Video Network Devices v1.0
Q&As: 311

The Implementing Cisco Video Network Devices v1.0 (CIVND) (210-065) exam is a 75-minute, 55-65 item exam that assesses how sales teams can effectively position in the CCNA Collaboration Cisco Video Network Specialist. Some of the topics assessed are how to consider the challenges faced by business and IT today and how this relates to Cisco opportunities. The pass4itsure 210-065 dumps exam also assesses who “the customer” is and the importance of applications to many of the customers that are influential in purchasing application-based solutions. This certificate proves that the candidate has an advanced understanding within the Implementing Cisco Video Network Devices v1.0.
210-065 dumps
Candidates who participate in the Cisco certification 210-065 dumps training materials should select exam practice questions and answers of pass4itsure, because pass4itsure is the best choice for you. With pass4itsure.com, you will have access to appropriate and best training materials so that you can directly start your real practice for the Cisco 210-065 exam.The recommended course have been carefully examined in order to create the Cisco 210-065 dumps tests.
pass4itsure 210-065 dumps
Cisco 210-065 dumps exams cram will be your best choice for your real exam. We pass4itsure not only offer you the best dump exams but also golden excellent customer service. Pass4itsure.com covers all the pertinent areas and necessary guidelines to enable you to clear the Implementing Cisco Video Network Devices v1.0 210-065 exam with minimum hassle. If you have some questions, welcome to have conversations with our online service persons. Or you could send Cisco 210-065 dumps test questions to our after-sale email, to contact us via email.
Latest Updated Pass4itsure Cisco 210-065 Dumps Implementing Cisco Video Network Devices v1.0 Exam Demos Online With Low Price.

, , , ,